…you might want to sing it note for note. Okay so there is a joke in there somewhere. Here is song I put together a while ago. I haven’t had time until now to put any polish on it. It is still a work in progress, but take a listen and tell me what you […]

The guitar has finished drying and I’ve reassembled all the hardware. Below are some pictures after the buffing, reassembly, and application of the 5150 space tape. I’ve also included a little before and after look at the guitar. BEFORE:   AFTER:

The clear coat has been applied now. Over a couple of days I put on about 15 coats. The clear has helped to even out the tape lines a good bit. This is especially true with the white lines. The black ones are still noticeably a little heavier, but not enough to really cause a […]

With all the painting done only a few steps remain. Today I have applied the Kramer logo to the head stock. This is going under the clear coat. Here is a picture of the logo once it was in place…

The final color for the project is black. Only a few black stripes are needed so I decided to paint it last. My other option would have been to paint the entire guitar black first, then white, and finally red. I was worried about having to spray too many coats of white to actually cover […]

With the taping out of the way it is time to apply the fiesta red. First here is the head stock. Next is the body. All of these pictures are after 3-4 coats. I allowed the final coat to dry for about 20 minutes before I started to remove the tape. I wanted to make […]

The white coat seemed very dry today so I’ve started the striping process. In the pictures below you can see the head stock along with the body with the tape applied. Â Â The largest stripes are 3/4 inch. The stripe around the outside of the guitar is 1/2 inch. The next smallest is 1/4 […]